by Shelagh Manton
Someone has suggested that TiMidity++ is not up to it when it comes to being a nice midi synth for use with Rosegarden. I investigated ways to improve its sound by using the FluidR3_GM.sf2 soundfont which can be found in the package repositories of many distributions these days. TiMidity++ is ideal for those who do not want to use
jackd to set up softsynths such as
fluidsynth, QSynth, or the DSSI synth plugins. If you only work in MIDI and have no wish to do audio work maybe the following advice might be your best bet for getting quality sound out of Rosegarden.
You will need admin privileges to do the following. On Red Hat based distros you are not always set up to use sudo, you might have to su to a privileged shell, instead.
First install the soundfont
sudo apt-get install fluid-soundfont-gm fluid-soundfont-gs
or (if you're on a Red Hat based distro)
sudo yum install fluid-soundfont
Other people you're on your own.
You will find it in
/usr/share/sounds/sf2/ (Ubuntu, possibly all Debian derivatives)
/usr/share/soundfonts/ (Red Hat)
Then open /etc/timidity/timidity.cfg
sudo gedit /etc/timidity/timidity.cfg
There will be a line at the bottom of the config file which reads
replace that with the following
dir /usr/share/sounds/sf2/ soundfont FluidR3_GM.sf2
dir /usr/share/soundfonts/ soundfont FluidR3_GM.sf2
save the file…
And then in a terminal do
sudo /etc/init.d/timidity restart
for Ubuntu and friends.
If this fails to work, or for distros other than Ubuntu, you may need to run TiMidity++ manually. It has a complicated set of options, but the only option you need to be concerned with is whether to direct its audio through JACK or directly through ALSA.
If you have JACK running, try using:
timidity -iA -Oj
If not, try this instead:
timidity -iA -Os
(In either case, you always want “-iA” which makes TiMidity++ become an ALSA MIDI client, so it can be used with applications like Rosegarden.)
When you start up Rosegarden and open an rg file, you may still be disappointed that you don't get sound out of the box.
What you need to do is go to Studio → Manage Midi Devices
There will be a series of midi ports as in the following picture. (Picture depicts the 1.7.x line of Rosegarden. 09.10 and later have a somewhat different device manager.)
These need to be changed to the following.
Click on the
14:0 Midi Through Port-0 (duplex) and change to
128:0 TiMidity port 0 (write).
Then play the song and hear the music. You might save this as your default studio for new files with Studio ⇒ Save Current Document as Default Studio.